Do you want to make the leather edges of your product smooth without hiring a professional? You can do it by applying burnishing gum. I have shared a guide on applying burnishing gum, the required tools, and materials.
Additionally, I have discussed some common mistakes to avoid during this process. Read the blog to know the details.
What Tools and Materials Do You Need?
You will need some essential materials and tools for this task. I have listed them here:
◈ Eagle Leather Burnishing Gum
◈ Edge Beveler
◈ Sandpaper (Up to 600 grit)
◈ Wood or Plastic Slicker
◈ Soft cloth
Buy Online: You can get most of these materials in the Leather Burnishing Gum Edge Finish Kit by ordering it online.
A Step-by-Step Guide to Burnishing Edges
Burnishing leather edges with the cream is an easy process. You can do this task by following these easy steps:
Step 1: Do Leather Beveling
Start by beveling your leather edges to give this a professional and proper shape. You can do this using a good-quality leather beveler.
Note: The leather bevelers come in different sizes and shapes, such as straight or blade, to create the required leather edges. Choose the beveler type according to your requirements of leather thickness.
Step 2: Sanding of Leather Edges
Next, sand the leather edges using a fine-grit sandpaper. It will make the leather edges smooth, flat, and satisfying.
Step 3: Apply the Burnishing Gum on Leather Edges
Now, shake the gum and apply it to the leather edges. Use a paper towel, a soft brush, or a soft cloth to get the best results.
Also Read this Blog: What Is Leather Burnishing Gum and How Does It Work?
Step 4: Allow it to Get Tacky
Next, leave the gum untouched for 1 minute and allow it to get tacky. During this period, it will settle down.
Step 5: Run the Slicker on the Edges
After that, run the slicker on the leather edges from top to bottom. Use a small amount of pressure and move it fast. Do not let the edges get dry during this process.
You can apply more gum if needed. Continue this process for 60-80 seconds until it becomes smooth and professional-grade.
Step 6: Second Coat of Burnishing Gum
Apply a second and thin coat of burnishing gum for a more professional look. You can also apply a layer of conditioner.
Note: It is optional to apply a thin layer. You can avoid this if you get professional results in the first coat.
Common Mistakes to Avoid
It is possible to apply burnishing gum perfectly if you avoid some common mistakes. I have listed here these mistakes:
1. Not Applying Required Pressure
If you do not apply the required Pressure while slicking, it will not give the desired results. Therefore, avoid rubbing the edges too gently or too harshly.
2. Doing Things in a Hurry
Do not do burnishing immediately after applying the gum. Missing the dry time can be a big mistake.
3. Doing Burnishing Before Beveling
Avoid burnishing of leather edges before beveling. It will lead to the creation of tough and unprofessional leather edges.
4. Starting the Process without Practice
Do not perform this process before practicing it on a small piece of leather edge. It can save you from common mistakes.
Conclusion
Using a burnishing gum accurately is not complicated. Even a beginner can get professional results. You only need a good burnishing gum and a perfect guide to apply.
You have to get both of these through this blog. Now, it is time to get in action and use the gum for your favourite leather product. Let us know your experience in the comment section!
